KV Enterprises

• 1-C formulation
• Elastic
• Can be overpainted
• Good gap-filling properties
• Capable of withstanding high Dynamic stresses
• Vibration-damping
• Non-corrosive
• Electrically non-conductive
• Bonds well to a wide variety of substrates
• NSF registered, Proprietary Substances and Nonfood Compounds

• 1-C formulation
• Elastic
• Can be overpainted
• Good gap-filling properties
• Capable of withstanding high Dynamic stresses
• Vibration-damping
• Non-corrosive
• Electrically non-conductive
• Bonds well to a wide variety of substrates
• NSF registered, Proprietary Substances and Nonfood Compounds

• Bonds and seals at the same time
• One part formulation
• Replaces rivets and mechanical fasteners
• Very high thixotropy for good gap filling properties
• Adhesion to a wide range of substrates. - Short tack free and curing time
• Non-staining curing process
• Initial load bearing capacity
• Sandable and paintable
• Increases torsional stiffness of final assembly
• Shock/impact resistant. Vibration and sound damping
• Excellent weather and water resistance
• USDA approved for incidental food contact

• Seek manufacturer's advice before using on plastics that are prone to stress cracking
• Bonding of floors (plywood, blandex, wood, metal) to subfloor or metallic frame
• Bonding of all exterior or interior panels, walls, sheets to corners or tubular frames

Description:
Sikaflex -515 Isocyanate Free Fast Skinning Sealant is a one-component sealant based on the Sika silane terminated polymer (STP) technology. The product cures on exposure to atmospheric humidity to form a durable elastomer. Sikaflex-515 is manufactured in accordance with ISO 9001 / 14001 quality assurance system and the responsible care program.

Product Benefits

• Fast skinning
• Good weathering and thermal stability
• Bonds well to a wide variety of substrates without the need for special pre-treatment
• Elastic
• Very good workability performances
• Can be over painted
• Low odor
• Isocyanate Free
• Silicone- and PVC-free

• 1-C formulation
• Elastic
• Low odour
• Resistant to ageing and weathering exposure
• Non-corrosive
• Can be over-painted
• Can be sanded
• Bonds well to a wide variety of substrates
• NSF-approved for incidental food contact.

• 1-C formulation
• Elastic
• Low odour
• Resistant to ageing and weathering exposure
• Non-corrosive
• Can be over-painted
• Can be sanded
• Bonds well to a wide variety of substrates
• NSF-approved for incidental food contact.

• Ageing and weathering resistant
• Bonds well to a wide variety of substrates without the need for special pre-treatment
• Elastic
• Can be overpainted
• Can be sanded
• Low odor
• Non-corrosive
• High electrical resistance
• Isocyanate- and solvent-free
• ilicone- and PVC-free

• 1-C formulation
• Elastic
• Low odour
• Resistant to ageing and weathering exposure
• Non-corrosive
• Can be over-painted
• Can be sanded
• Bonds well to a wide variety of substrates
• NSF-approved for incidental food contact.

• 1-C formulation
• Elastic
• Low odour
• Resistant to ageing and weathering exposure
• Non-corrosive
• Can be over-painted
• Can be sanded
• Bonds well to a wide variety of substrates
• NSF-approved for incidental food contact.

• 1-C formulation
• Elastic
• Low odour
• Resistant to ageing and weathering exposure
• Non-corrosive
• Can be over-painted
• Can be sanded
• Bonds well to a wide variety of substrates
• NSF-approved for incidental food contact.

• Primerless to glass
• One-component formulation
• Cold application
• Good application properties such as bead stability / good non-sag properties
• Short cut-off string
• Easy to extrude with manual gun

• Resistant to a wide range of rail industry cleaning agents
• Excellent weathering stability
• Very good processing and tooling characteristics
• Tested according to E DIN 6701-3:2010-8;
• Solvent- and PVC-free

• Impact Resistant
• Moisture Resistant
• Vibration Resistant
• Water Resistant

• Elastic
• Low odor
• Resistant to ageing and weathering exposure
• Non-corrosive
• Can be overpainted
• Can be sanded
• Bonds well to a wide variety of substrates.

• C formulation
• Elastic
• Low odor
• Resistant to ageing and weathering exposure Non-corrosive
• Can be overpainted
• Can be sanded'
• Bonds well to a wide variety of substrates
• NSF-approved for incidental food contact and potable water. Black and White only. 

• 1-C formulation
• Low odour
• Excellent working characteristics
• Fast cure time
• Resistant to ageing and weathering
• Solvent and PVC-free
• Equally suitable for manual application and bulk dispensing
• Primerless application possible 

• Adheres to a wide range of substrates, without primer in many cases
• Exhibits tenacious adhesion to aluminum, FRP, steel, wood, SMC, RIM, prepainted metals, ZINCALUME, Zincgrip, and aluminized steel, without attacking the metal coating
• Fast tack free time
• Cures rapidly to a elastic consistency with excellent cut and tear resistance
• Low odor, non-staining
• Paintable
• Weather resistant
• Resistant to road salts

• Sealing exterior lap seams in many applications, including truck trailers, RV''''s, metal roofs, window perimeters, grain bins and HVAC units
• Sealing rivet seams
• Sealing of exposed and concealed joints of aluminum, steel, coated metals, wood, roof rails, and door hinges in transport equipment
• Sealing and caulking expansion joints
• May be suitable for use on a wide variety of substrates; including aluminum, steel, glass, wood, metal primers and paint coating (2-c systems), metals, painted plastics and many different types of plastic.

• Adheres to a wide range of substrates, without primer in many cases
• Exhibits tenacious adhesion to aluminum, FRP, steel, wood, SMC, RIM, prepainted metals, ZINCALUME, Zincgrip, and aluminized steel, without attacking the metal coating
• Fast tack free time
• Cures rapidly to a elastic consistency with excellent cut and tear resistance
• Low odor, non-staining
• Paintable
• Weather resistant
• Resistant to road salts

• Sealing exterior lap seams in many applications, including truck trailers, RV''s, metal roofs, window perimeters, grain bins and HVAC units
• Sealing rivet seams
• Sealing of exposed and concealed joints of aluminum, steel, coated metals, wood, roof rails, and door hinges in transport equipment
• Sealing and caulking expansion joints
• May be suitable for use on a wide variety of substrates; including aluminum, steel, glass, wood, metal primers and paint coating (2-c systems), metals, painted plastics and many different types of plastic.

• 2 hour Minimum Drive Away Time, acc. FMVSS 212 / 95th percentile dummies
• Compatible with all car makes thanks to Sika’s all-in-one modulus technology
• Optimized for hot climate areas
• Compatible with Black-Primerless and All Black installation process
• Solvent-free
• Optimized for manual application guns
• Automotive OEM quality

Sika Aktivator-205 Pre Treatment Agent is an alcohol solution containing a bond activating substance designed for the activation of surfaces prior to bonding and sealing with Sika® products. Sika® Aktivator-205 is manufactured in accordance with ISO 9001 / 14001 quality assurance system and with the responsible care program.

Areas of Application:
Sika® Aktivator-205 is used to activate the following non-porous substrates: metals, plastics, enamelled glass (ceramics), painted surfaces. This product is suitable for experienced professional users only. Tests with actual substrates and conditions, especially boundary temperature conditions have to be performed to ensure adhesion and material compatibility.

Method of Application:
Wipe bond faces with a clean lint free paper towel moistened with Sika® Aktivator-205. Change paper towel after each wipe. If pretreated area is not bonded after 2 hours the activation process has to be repeated (max. 2 times). Ideal application and surface temperature is between 15°C and 25°C (60 - 75°F). Consumption depends on the specific nature of the substrates and manufacturing process. Tightly re-seal container immediately after each use. Prolonged exposure to atmospheric moisture will cause Sika® Aktivator-205 to become opaque/cloudy and therefore inactive. Discard any product in this condition. Flash-off times may vary depending on climatic conditions.

Description:

Sika Tooling Agent N is water-based, solvent-free tooling agent for Sikaflex products.

Sika® Tooling Agent N is a water-based, solvent-free tooling agent for use with Sikaflex® products. Sika® Tooling Agent N is manufactured in accordance with the ISO 9001/14001 quality assurance system.

Areas of Application

Sika Tooling Agent N is designed to smooth the surface of freshly applied Sikaflex adhesives and sealants. In tested Cases, Sika Tooling Agent N has been shown not to affect paint finishes. However, in critical cases, we recommend a pre-test in order to evaluate compatibility, especially with fresh and/or water-based paints. This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.

Product Benefits

• Neutral
• Non-aggressive to skin
• Does not attack paints (even water-based)
• No washing-out or etching of fresh applied sealants or adhesives

Sika Aktivator 100 Solvent Based Adhesion Promoter For Various Substrates is a solvent-based colorless adhesion promoter, which reacts with moisture and deposits active groups on the substrate. These groups act as a link between substrates and primers or sealants/adhesives. Sika® Aktivator-100 is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.

Areas Of Application:
Sika® Aktivator-100 is used to improve adhesion on substrates such as float glass, ceramic screen prints, the cut face of old polyurethane adhesives and paints. This activator is also suitable to enhance the adhesion of Sikasil® sealants and adhesives on non-porous substrates.

Seek manufacturer’s advice and perform tests on original substrates before using Sika® Aktivator-100 on materials prone to stress cracking. This product is suitable for experienced professional users only. Tests with actual substrates and conditions have to be performed to ensur.

Method Of Application:
Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing and cleaning prior the activator application.

Other Details:

• Made in Switzerland

• Made in Switzerland

• Store cool and dry place
• Made in Switzerland

• Made in Switzerland

Description: 
Black Sika Primer 206 G Plus P is a solvent-based black primer which reacts with moisture and forms a thin layer. This layer acts as a link between substrates and adhesives. Sika® Primer-206 G+P is specifically formulated for the treatment of bond faces prior to application of Sika’s 1-component Polyurethanes.

Areas of Application:
Sika Primer-206 G+P is used to give improved adhesion in adhesive bonding applications on substrates such as glass, ceramic coated glass, and painted surfaces. Sika Primer-206 G+P can also be used on other substrates such as plastics and some metals. This product is suitable for experienced professional users only. Tests with actual substrates and conditions, especially boundary temperature conditions have to be performed to ensure adhesion and material compatibility.

Method Of Application:
Surfaces must be clean, dry and free from grease, oil, dust and contaminants. Adhesion on substrates may be improved by adding and/or combining pre-treatment processes such as scuffing and cleaning. Pre-treat the bond face of the substrates with Sika® Aktivator-100 using the wipe-on, wipeoff method and allow flashing-off.

Application:
Shake the Sika® Primer-206 G+P can very thoroughly until mixing ball rattles freely. Continue shaking for another minute and apply a thin but covering coat with a brush, felt or foam applicator. Ideal application and surface temperature are between 15 °C and 25 °C (59 °F and 77 °F). Sika® Primer-206 G+P has to be applied once only. Care must be taken to ensure that this single application gives adequately dense coverage. Consumption and method of application depend on the specific nature of the substrates. Tightly reseal container immediately after each use.

White Sikaflex 521 UV Polyurethane Adhesive is a multi-purpose, weathering resistant, non-sag, elastic, one-part silane-terminated polyurethane hybrid sealant, which cures on exposure to atmospheric moisture to form a durable elastomer. Sikaflex® -521 UV is isocyanate free and contains no added solvents. Sikaflex® -521 UV is manufactured in accordance with ISO 9001 / 14001 quality assurance system and the responsible care program.

Product Benefits:

• 1-C hybrid formulation
• Elastic
• Ageing and weathering resistant
• Bonds well to a wide variety of substrates without the need for special pre-treatment
• Can be overpainted
• Can be sanded
• Low odor
• Non-corrosive
• High electrical resistance
• Low VOC and no added solvents
• Silicone- and PVC-free 

Areas of Application:
Sikaflex® -521 UV bonds well to a wide variety of substrates and is suitable for making permanent, high strength elastic seals. Compatible substrate materials include wood, metals, metal primers and paint coatings (two-part systems), ceramic materials, and plastics. Seek manufacturer’s advice before using on transparent materials that are prone to stress cracking.

Description
Organic Solvent Sika Remover 208 is used to remove traces of Sikaflex products as well as for cleaning painted substrates. Sika Remover-208 is manufactured in accordance with ISO 9001 / 14001, quality assurance system and with the responsible care program.

Areas of Application:
Sika Remover-208 can be used to remove uncured excess Sikaflex adhesive or sealant from application tools or soiled surfaces. Sika Remover-208 can also be used for pre-cleaning strongly contaminated non-porous substrates. Sika Remover-208 can be used to clean painted surfaces prior to bonding. Use Sika Remover-208 according to the Sika Pre-treatment Chart. This product is suitable for experienced professional users only. Tests with actual substrates and conditions must be performed to ensure adhesion and material compatibility.

Method of Application:
Removal of uncured adhesive Remove the bulk of the Sikaflex® residue with a knife or spatula. Moisten a rag or towel with Sika® Remover® -208 and wipe off the remaining adhesive or sealant. Surface cleaning Wipe painted surfaces with a moistened rag or towel with Sika® Remover -208. Wet the paper towel by pouring the Sika® Remover 208 onto the cloth. Do not dip towel into the can as there is risk of contamination. Wipe the surface with the wetted paper towel. Use fresh paper towels regularly in order to maximize cleaning power and minimize recontaminating surface. Before the solvent evaporates, wipe off with a fresh, clean, dry paper towel. Repeat above process as necessary until no contaminant is visible on a clean paper towel. Do not use on sensitive surfaces such as fresh paints, particularly one pack air drying paint systems. Reseal container immediately after use. 

• 1-C formulation
• Elastic
• Low odour
• Resistant to ageing
• Non-corrosive
• Can be overpainted
• Can be sanded
• Bonds well to a wide variety of substrates NSF-approved for incidental food contact.  

• Sikaflex® -221 bonds well to a wide variety of substrates and is suitable for making permanent elastic seals of high adhesive strength. Suitable substrate materials are metals, metal primers and paint coatings (2-C systems), ceramic materials and plastics.
• Seek manufacturer’s advice before using on transparent and pigmented materials that are prone to stress cracking.
• This product is suitable for experienced professional users only. Test with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.